5 minutes to program your PCB assembly ( PCBA ) AOI machine
Click here for software download & more information!
"Work is the refuge of people who have nothing better
to do." - Mark Twain. Are you tired of dedicating countless hours to programming your PCB
inspection AOI machines? Our Unisoft ProntoAOI software, developed over the last
35 years, can provide you with more time to pursue your passions and interests.
Think about all the additional time you could spend reading, gaming, or even
relaxing. Just kidding about these, boss.
Seriously, the ProntoAOI
software is used by electronics manufacturers and creates programs for PCB assembly ( PCBA ) Automatic Optical Inspection (AOI) machines & includes the basic features of ProntoVIEW-MARKUP.
The Unisoft ProntoAOI software translates CAD or Gerber and Bill of Materials
(BOM) files into real reference designators, X/Y body centers, Theta rotation,
part numbers, etc. This data is then used by Process Engineers to program their
AOI machines. ProntoAOI programs popular newer and older AOI equipment. Most
machines are supported such as Agilent, Aleader, AOI Systems, ASC International,
Beijing Torch, Christopher Associates, CR Technology, CyberOptics, DCB
Automation, Goepel Electronics, JT Automation, Jutze Technology, Koh Young,
Landrex Technologies, Machine Vision Products (MVP), Marantz, MEK, Mirtec,
Omron, Orbotech, Parmi, Pemtron, Photon Dynamics, Saki, Samsung, Shanghai Holly,
Test Research, Vi Technology, Viscom, ViTrox, YESTech, YesTek, ZhenHuaXing, etc.
Other AOI machine models can be programmed with standard outputs the Unisoft
software creates. Also some AOI machines need only standard CAD file formats to
program them and the Unisoft software as options available to input one type of
CAD file format and then export a standard CAD file format such as GENCAD,
IPCD356, IPC-2581, MENTOR Neutral, PADS, Fabmaster, .XML, etc. that can then be
used to program those AOI machines. Trial Software (The trial software is free. Start using the fully licensed software for as little as $500. For over 35 years, Unisoft has had the best prices.).
ProntoAOI also includes, at no additional charge, the basic features of ProntoVIEW-MARKUP and is used by PCB assembly ( PCBA ) electronic manufacturers with features such as detailed viewing of PC board assemblies and the creation of documents, etc. required throughout the PCB assembly ( PCBA ) process. The software increases efficiency, communications and reduces errors across the production floor. With over 100 features ProntoVIEW-MARKUP aids every department every day on the shop floor of PCB assembly ( PCBA ) manufacturers where it is used by management, assembly, inspection, design, Test, troubleshooting technicians and other personnel. The software creates assembly instructions with unique colors for each part number and step in the assembly process and generates matching kitting labels. Locate any component, pin or part number, finds shorts between traces, netlist, paperless hyperlinked schematic linked to the asssembly, add annotation notes and graphics. The software provides fast PC Board first article inspection and general inspection. Create reports containing device and package type counts with quotation and cost estimations, etc.. With a current license distribute the Unisoft PC Board viewer software to your production floor, vendors, customers, etc. to aid assembly, 1st article inspection, general inspection, repair/rework, technician debug, for better communications, etc. If needed ProntoVIEW-MARKUP can be controlled remotely from your application or equipment via the supplied external API programming interface.
Sample AOI machine setup file created by Unisoft ProntoAOI (all popular machine formats supported):
YESTECH AOI: .YESTECH_CAD [Header] Version= 1 RecipeName= 7807_TOP Scale= 25.4 InvertXPos= 0 InvertYPos= 0 RotationDir= 1 RotationOffset=0 BoardWidth= 9187.0 BoardHeight= 6364.0 PNLib= IsSharedPNLib= 0 PkgLib= PkgNameMap= IsTopSide= 1 [PartList] RefID NAME X Y Rot Pkg Description C144 315-507000-107 5150.00 3048.00 90 S6032T_TOP CAP: TANT 100uF 6.3V 20% CASE 6032 C77 315-406000-047 5871.50 2109.00 0 S3528T_TOP CAP: TANTALUM CHIP 4.7uF 20% 16V EIA 3528 C1121 315-304006-104 1779.00 700.00 90 S0402T_TOP CAP .1uF 16V Y5V 0402 C1055 315-406000-047 5127.00 693.50 90 S3528T_TOP CAP: TANTALUM CHIP 4.7uF 20% 16V EIA 3528 R311 347-000064-536 5694.00 1293.00 270 S0603T_TOP RESISTOR: 53.6 OHM 1% 0603 R165 347-000080-332 3166.00 2688.00 270 S0402T_TOP RESISTOR: 33.2 OHM 1% 0402 MIRTEC AOI: [Fiducial] Fid1_X= 0 Fid1_Y= 0 Fid2_X= 0 Fid2_Y= 0 [Part Info] Coordinate Transform=NO Part Count=82 #00000001,-53340,11430,342,385848-05-6,CR24,2-PIN THUR-HOLE / UNIVERSAL VCD AUTO INSERT #00000002,-37465,34925,342,385848-05-6,CR13,2-PIN THUR-HOLE / UNIVERSAL VCD AUTO INSERT #00000003,6985,57785,161,385848-05-6,CR1,2-PIN THUR-HOLE / UNIVERSAL VCD AUTO INSERT #00000004,-121920,17145,270,391777-06-8,C2,1206 / CHIP SHOOTER AUTO INSERT C211 003-W2122104K 5315 4360 0 0402 CAP .1UF 10V CERAMIC 0402 C194 003-W212A104K 567 5 3955 0 0402 CAP .1UF 10V CERAMIC 0402 C125 600-RW1120JW 6145 1575 180 0603 CAP RF 12 PF 600 SERIES C116 007-1213H473K 5625 1410 90 0603 CAP .047UF 50V CERAMIC 0603 C117 003-0012A104K 8300 1215 0 0402 CAP .1UF 10V CERAMIC 0402 C148 120-77131H121J 5625 2660 90 0603 CAP CERAMIC 120PF 50V 0603 SMD Part Count=82 #00000001=-869950,539750,180,395422-01-9,U11,SOIC8,I/O CONTROLLER #00000002=-1155700,273050,90,391818-06-6,U3,SOIC48,74HC14 #00000003=-869950,406400,180,395422-01-9,U12,SOIC8,ILD251 #00000004=-1447800,520700,90,391829-03-3,U4,SOIC20W,74HCT640 <xml version="1.0"> <unisoft version="1.0" units="mils"> <board name="C:\PROGRAM FILES\UNISOFT\SAMPLE.CAD" width="6910" height="2575"> </board> <layers> <layer name="TOP" top="true" bottom="false" sequence="1"/> <layer name="4" top="false" bottom="false" sequence="2"/> <layer name="5" top="false" bottom="false" sequence="3"/> <layer name="BOTTOM" top="false" bottom="true" sequence="4"/> </layers> <nets> <net name="BUFCLK"/> <net name="IOMCLK"/> <net name="IDI-16"/> </component> <component name="R36" x="-3800" y="550" devicetype="SMD" partno="391729-02-0" layer="BOTTOM"> <outline> <line x1="-3831" y1="651" x2="-3769" y2="651"/> <line x1="-3769" y1="651" x2="-3769" y2="449"/> <line x1="-3769" y1="449" x2="-3831" y2="449"/> <line x1="-3831" y1="449" x2="-3831" y2="651"/> </outline> <pins> <pin name="1" x="-2250" y="500" component="CR24" net="N_867" pin1="true"/> <pin name="2" x="-1950" y="400" component="CR24" net="CGND"/> <pin name="1" x="-1625" y="1425" component="CR13" net="N_829" pin1="true"/> <pin name="2" x="-1325" y="1325" component="CR13" net="N_871"/> <traces> <trace x1="-4575" y1="2000" x2="-4600" y2="1975" net="-RDLTCH" layer="BOTTOM"/> <trace x1="-4600" y1="1975" x2="-4600" y2="1950" net="-RDLTCH" layer="BOTTOM"/> <trace x1="-5475" y1="1025" x2="-5475" y2="1100" net="-IOMRD" layer="BOTTOM"/> <trace x1="-5725" y1="1575" x2="-5725" y2="1625" net="BUFCLK" layer="BOTTOM"/>
If you have a question use the email that follows or call us.
Online meetings are usually the fastest way to learn about the Unisoft software. We can go online virtually anytime to answer questions and process one of your PC Board projects or use our data files to show you the software.
To start or schedule a meeting or for questions, call us at (enable JavaScript for our phone number) or email (enable JavaScript for our email addressindex.htm). If we are available, we can go online immediately, or you can set up a time for an online meeting.
Procedure to start an online meeting
Option 1: Use the meeting invitation email sent you.
Option 2: Call us at (enable JavaScript for our phone number) to start the meeting then go to https://www.goto.com and normally located in the upper right click "Join" and click "Meeting" and under "Join a session" enter the session ID number given you.
Some features of ProntoAOI:
The ProntoAOI software also includes the basic features of ProntoVIEW-MARKUP:
Other features in the Unisoft software suite:
The trial software has HELP for most menu items by hovering over the menu item for a second then click any of the videos, manual or website links to learn about the software.
VIDEO: Click the video above for product overview.
Please double check that your email address is correct.
Email addresses are kept private.
The software download link, more information and periodic updates will be sent to this address.
Optionally to receive your software call us (enable JavaScript for our phone number).
The basic features of ProntoVIEW-MARKUP are included at no additional charge and adds features such as detailed viewing of PC board assemblies and the creation of documents, etc. required throughout the PCB assembly ( PCBA ) process. The software increases efficiency, communications and reduces errors across the production floor. With over 100 features aids every department every day on the shop floor of PCB assembly ( PCBA ) manufacturers where it is used by management, assembly, inspection, design, Test, troubleshooting technicians and other personnel.
The information and figures that follow outline a few of the features of ProntoVIEW-MARKUP or go to the ProntoVIEW-MARKUP page for more detail.
The Unisoft software allows you to quickly create matching assembly lists and assembly drawing sheets for each step in the assembly process. Part numbers are automatically assigned to the assembly step you wish (for example: Step 1 for Hand Inserts, Step 2 Chip Shooter components, etc). The part numbers are then automatically uniquely colored. If needed, overlay annotation notes can be added to each step. Next for each step matching assembly lists and assembly drawings are created. These drawings can either be printed or save to a file (PDF Adobe, etc.) or displayed on the screen.
Download a sample of process and assembly sheet documentation created by this software.
The Unisoft software allows you to quickly create Kitting Labels with barcodes for fast and accurate electronic component kitting. Quickly select the component part numbers for which you wish kitting labels created. Each label contains the part number, unique part number color, step number, p/n description, reference designator, etc. Fast and easy electronic kitting labels for kitting work orders.
Barcodes of various types can be printed on the kitting labels and shown on the display for quick kitting,
fast assembly machine feeder loading, verification, inspection, etc.: 2d-qr code, 2d-data matrix, etc.
Paper or Paperless assembly instructions are available using the Unisoft software. If paperless assembly instructions are desired then many options are available. For example two options might be that the below 3 operations for Mary, Jane and Joe can be shown as the same display, as pictured above, on each of their 3 monitors. The other option may be that the 3 color operations above can be separated into 3 separate .F2B database files and then each .F2B displays only their unique operation on each of their 3 monitors.
Further the operators can select one of their several part numbers to be install from below and only those components with the selected part number will blink on the display.
If paper assembly documents are desired from the paperless display simply click the PRINT ASSEMBLY DOCUMENTS button and the hard copy created can be ordered by step, color, operation, etc.
Import your PC Board into the Unisoft manufacturing software and you instantly receive a report containing component counts for top and bottom of the PC Board broken down by SMT, Fine pitch, BGA's, Thru-hole, etc. with the cost for each group. You can create as many PCB assembly ( PCBA ) Cost templates as you wish, for example one each for either a Low, Medium or High volume build. This is a great quoting time saver for Contract and OEM manufacturers.
Example of a few lines of a report follows:
PC Board: 123-456
Date: 1-22-2013
Base 1st Unit Assembly Build Rate (Includes P/N Setup Rate) = 219.18
Each Unit Assembly Build Rate (Excludes P/N Setup Rate) = 74.18
Total Part Number Setup Rate = 145.00
________
SMT 2 pins greater than 0402 package type: Greater than .040 inch distance between pin 1 and 2.
Top - 4 = total device count, 8 = total pin count
Bottom - 78 = total device count, 156 = total pin count
Part #'s - 8 = total part numbers
Base Rate: 49.84 = (0.12 * device count) + (5.00 * part #'s)
SMT 8 pins and greater and 30 mils or less pin spacing (fine pitch):
Top - 3 = total device count, 144 = total pin count
Bottom - 0 = total device count, 0 = total pin count
Part #'s - 3 = total part numbers
BGA's - 0 = included in above count.
Base Rate: 15.48 = (0.16 * device count) + (5.00 * part #'s) + (0.75 * BGA count)
Instantly create a component part cost report. This report is used by Contract and OEM manufacturers to quickly estimate component parts costs. The report contains the total component part cost for the PC Board and breakdown by part number.
Report type: Parts count with quotation and cost estimation. PC Board: Controller Date: 1-12-09 Total parts cost = $43.31 ____
| 381200-40-1 | 1 | $0.23 | $0.23 |
| 381212-44-1 | 4 | $0.07 | $0.28 |
| 385848-05-6 | 32 | $0.45 | $14.40 |
| 386754-99-4 | 1 | $0.16 | $0.16 |
| 389148-06-7 | 1 | $0.06 | $0.06 |
| 390579-03-3 | 1 | $0.80 | $0.80 |
| 390607-01-0 | 1 | $0.65 | $0.65 |
| 391727-10-9 | 16 | $0.04 | $0.56 |
| 391727-12-5 | 16 | $0.04 | $0.64 |
Instantly create a report of the total solder joint count for Defect Per Million Operations (DPMO). This report is used by Contract and OEM manufacturers for quality tracking. The report contains the total solder joints for the PC Board broken down by SMT and Thru Hole and part number.
Report type: Solder joint count with quotation and DPMO estimation.
PC Board: Controller
Date: 1-12-09
Total Solder Joints = 1104
Total SMT Solder Joints = 598
Total Thru Hole Solder Joints = 506
____
SMT 2 pins greater than 0402 package type: Greater than .040 inch distance between pin 1 and 2.
Top - 4 = total device count, 8 = total pin count
Bottom - 78 = total device count, 156 = total pin count
Part #'s - 8 = total part numbers
SMT 8 pins and greater and greater than 30 mils pin spacing:
Top - 17 = total device count, 290 = total pin count
Bottom - 0 = total device count, 0 = total pin count
Part #'s - 8 = total part numbers
BGA's - 0 = included in above count.
Thru-hole 2 pins:
Top - 34 = total device count, 68 = total pin count
Bottom - 0 = total device count, 0 = total pin count
Part #'s - 3 = total part numbers
Thru-hole 8 pins and greater:
Top - 24 = total device count, 284 = total pin count
Bottom - 0 = total device count, 0 = total pin count
Part #'s - 6 = total part numbers
The Electronic Components Search feature helps you find information such as cost, availability, part shape, electrical specifications, etc. Provides fast searching for electronic parts using your favorite parts search engine for example Octopart, FindChips, Alldatasheets, ECIA Authorized, etc.
Search for electronic parts using the Manufacturer or Vendor P/N for example ERJ-3EKF1002V. Also search by the electronic component number or name such as MAX232, LM393, resistor 10k, shift registers, inverter schmitt trigger, etc.
All types of Bill of Material (BOM) formats can be imported into the Unisoft software and then exported to normalized standard BOM formats that can then be utilized by your other manufacturing software systems such as Part Sourcing, MRP, ERP, etc.
Easier drill down to component pins, trace runs and schematic. Display NETLISTS quickly using the "NET INFORMATION" window that displays the NET NAME of the selected component and pin and all the other pins on the net. The trace run of the selected net is highlighted and all pins on the net blink. If the schematic view is displayed then the net chosen is shown. The user can then select any one of the other pins on the net in the NET INFORMATION box. The result is the NET INFORMATION window will update to the new selected pin and the selected trace highlighted will update also. If the schematic view is displayed then that view will refresh too.
Find shorts between traces, netlists, netnames, component information, etc.
The Unisoft software outputs a single board file of the PCB assembly ( PCBA ) that is compatible with the PCB assembly ( PCBA ) viewer. Customers with a current license can distribute the PCB assembly ( PCBA ) viewer and the Unisoft PCB assembly ( PCBA ) board file to your production floor, other divisions, vendors, customers, etc. to aid assembly, first article inspection, general inspection, repair/rework, technician debug, for enhanced communications, etc.
Unisoft: Manufacturing software since 1985