Used by electronic manufacturers throughout the shop floor in every department every day, ProntoVIEW-MARKUP with over 100 features imports CAD or Gerber
More … or XY rotation and BOM, etc. files and displays the PC Board to perform production tasks. The software is used by assembly, inspection, design, test, troubleshooting technicians, management and other personnel. The software will create step by step assembly process documents, kitting labels, perform first article and general inspection, assembly and part cost reports to aid job quotations, solder joint count (DPMO) report, aid assembly, rework and repair. For PCB assembly ( PCBA ) troubleshooting, etc. finds components and pins, part numbers, netlist, trace runs, hyper-linked schematic to assembly, shorted netlist traces, etc.
Less …
ProntoPLACE creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines,
More … and includes the basic features of ProntoVIEW-MARKUP. Most machines are supported such as Assembleon / Philips, Mydata / Mycronic, Juki, ASM / Siemens, Universal, Fuji, Contact Systems, Samsung, Quad, Europlacer, Sanyo, Sony, Panasonic, Mirae, Essemtec, Yamaha, Hitachi, MultiTroniks, Amistar, Manncorp, Robotas, Autoronik-SMT, Dima, Dynapert, KME, Zevatech, Mamiya, Novastar, Ragen, TDK, Tenyru, Tescon, TWS Automation, etc.
Less …
ProntoAOI creates programs from CAD or Gerber or XY rotation and BOM files for setup of Automatic Optical Inspection (AOI) machines. It includes basic features of ProntoVIEW-MARKUP.
More … Most machines are supported such as YESTech, Mirtec, Orbotech, Agilent, Omron, CyberOptics, Viscom, Quad, Machine Vision Products (MVP), ViTechnology, Landrex Technologies, Christopher Associates / Marantz, Photon Dynamics, etc.
Less …
ProntoTEST-FIXTURE creates programs & design files from CAD or Gerber & BOM files for the design of "bed of nails" test fixtures & generates circuit description
More … files for your In-Circuit, MDA or Flying Probe Automatic Test Equipment (ATE) & boundary-scan support, and includes the basic features of ProntoVIEW-MARKUP. Most machines are supported such as Keysight / Agilent / Hewlett Packard, Teradyne, GenRad, Takaya Flying Probe, Spea, etc. Also boundary-scan systems are supported — for example Corelis, Flynn Systems, JTAG Technologies, XJTAG, etc.
Less …
ProntoSELECTIVE-SOLDERING creates programs from CAD or Gerber and BOM files for setup of Selective Soldering machines. It includes basic features of ProntoVIEW-MARKUP.
More … Most machines are supported such as ACE Production Technologies and check support for RPS Automation, Vitronics Soltec, APS NOVASTAR, Pillarhouse Soldering Systems, etc.
Less …
ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on the display and create, components, pins, netlists, etc.
More … Includes basic features of ProntoVIEW-MARKUP. This enhanced Gerber data can now be used by all departments and is used to create assembly process documents, kitting labels, perform first article inspection, assembly/part cost reports, solder joint count (DPMO) report, aid assembly, rework, repair, troubleshooting, etc. Also this data can be used to setup PCB assembly ( PCBA ) Pick & Place Assembly equipment, Automatic Optical Inspection (AOI) machines, ATE Test and Selective Solder equipment, dispensing machines, etc.
Less …
Translate your CAD, Gerber and BOM files into formats used to setup manufacturing equipment or for import into other manufacturing software or CAD systems.
More … Convert CAD or GERBER files to target outputs such as GENCAD, IPC-2581, Fabmaster FATF, IPCD356, MENTOR Neutral, PADS Ascii, .XML, etc., and includes the basic features of ProntoVIEW-MARKUP. Also in-house services are often available for exporting to these same CAD formats and in addition exporting to PCB assembly ( PCBA ) Pick & Place Assembly equipment, Automatic Optical Inspection (AOI) machines, ATE Test and Selective Soldering equipment, dispensing machines, etc.
Less …
CELLS Workflow MES is a Manufacturing Execution System software that provides product and job tracking for PCB assembly ( PCBA ) board and box builds. Includes some basic features of ProntoVIEW-MARKUP.
More … CELLS Workflow MES is also used in other industries such as medical, chemicals, aerospace, pharmaceuticals, foods, textile, etc.
Less …
For over 35 years the Unisoft software suite has been used to automate Electronics PCB Manufacturers (EMS/CEM, OEM & ODM) for fast New Product Introduction (NPI). Electronics PCB manufacturing is a high tech environment where every lost minute of output creates process delays and adds costs.
The Unisoft software imports all types of CAD, Gerber, XY rotation, BOM, etc. data formats which is key for PCB electronic contract manufacturers who have to without delay work with the variety of project data sources their customers provide them which is at times sparse and error laden.
Modules are available to quickly setup PCB Pick & Place Assembly equipment, AOI Optical Inspection machines, ATE Test and Selective Solder equipment, dispensing machines, etc.
Create PCB process assembly sheet documentation and kitting labels to assist assembly. Also aids PCB first piece inspection, general inspection, repair/rework, debug, etc.
CAD to CAD translations software converts one CAD format to another.
Subscribe or purchase only the software you require now and add modules as your needs grow.
Demonstrations or questions: We can go online virtually anytime and process one of your PC Board projects or use our data files to show you the software. To start or schedule a meeting or for questions call us at (enable JavaScript for our phone number) or email (enable JavaScript for our email addressindex.htm).
Trial software: Test drive the software today! Download the software products you are interested in.
Over 3000 customers worldwide.
A Manufacturing Execution System (MES) software module is also available for PCB electronics manufacturers and other industries such as medical, chemicals, aerospace, pharmaceuticals, foods and textiles. The MES software module option provides product and job tracking with traceability for regulatory compliance.
Online meetings are usually the fastest way to learn about the Unisoft software. We can go online virtually anytime to answer questions and process one of your PC Board projects or use our data files to show you the software.
To start or schedule a meeting or for questions, call us at (enable JavaScript for our phone number) or email (enable JavaScript for our email addressindex.htm). If we are available, we can go online immediately, or you can set up a time for an online meeting.
Procedure to start an online meeting
Option 1: Use the meeting invitation email sent you.
Option 2: Call us at (enable JavaScript for our phone number) to start the meeting then go to https://www.goto.com and normally located in the upper right click "Join" and click "Meeting" and under "Join a session" enter the session ID number given you.
For over 35 years Unisoft's focus has been creating software to automate production floors. The Unisoft software suite fits into your corporate software solution by handling the production floor in modern electronics & other manufacturing industries. The Unisoft software module areas available are in red below and the other executive software system areas you may have are in black.
Click the video above for Unisoft PCB assembly ( PCBA ) electronic manufacturing software overview.
Test drive the software today! Download the software products you are interested in.
Click here for Unisoft Suite manufacturing software literature.
Unisoft: Manufacturing software since 1985
